How to install skirting boards? – Instructions

Instructions In order to achieve aesthetically pleasing and long-lasting results, it is worth considering how to properly install skirting boards. Below you will find a description of proven installation methods, thanks to which you will be able to fix any type of skirting boards yourself.

How to prepare for installation?

In order to ensure that skirting board installation goes smoothly, regardless of the method, prepare for it properly.   In any case, first measure and correctly cut the skirting boards at a 45° angle, so that their dimensions match the length of the walls, taking into account the allowances used at the joints.

Carefully select all the materials you will use during the installation.   Dowels or adhesives are intended to be used with specific products, so check that they are compatible with the dimensions and material of your skirting boards and flooring.   If you can’t find skirting boards in the desired colour of your dreams, get a paint that can be applied to any material.   This can make the skirting boards almost invisible against the wall.

Skirting board installation using glue

One of the easiest ways to install a skirting board is to glue it with an adhesive or silicone intended to be used with a particular material.   The adhesive protects the expansion joint against dirt, sand and dust, and its use does not require drilling.   This reduces the risk of damaging the pipes or creating additional dirt.

Cover the back of the skirting board with a layer of properly prepared adhesive and press it against the wall and floor.   Pay attention not to apply too thick layer of the product, because the adhesive may leak.   If this happens, remove it with a damp sponge.   The adhesive can take up to 24 hours to dry.   After this time, you can gently remove the residue with an abrasive sponge.   Once the adhesive has dried, it is difficult to correct any shortcomings.   The adhesive is usually so strong that when you try to remove the skirting board, it comes off with a fragment of the wall or plaster.